Questions? Call Us at: 1-888-330-3964

Surgery

Page:
  1. 1
  2. 2
  3. 3
  4. 4
  1. Regular Price: $599.00

    Special Price $299.00

    Bone expander drills are an alternative to osteotomes for the expansion and condensing of the atrophic mandible and maxilla. Expanders are also an alternative to the maxillary sinus elevation technique. New Concave bone expander option for the crestal approach sinus lift.

    • Available as Convex or Concave (for sinus lifts)
    • 5 color-coded bone expanders (2.6, 3.0, 3.4, 3.8 and 4.3mm), plus Pilot Drill: 2.0mm Pilot Drill and Saw
    • Connector: Ratchet Wrench Connector (Adaptor 1),Latch Style Handpiece Connector (Adaptor A)
    • Thumb Knob: For manual, finger usage 
    • Use With Ratchet Wrench Or Low Speed Handpiece
    • Need ridge splitting instruments? Check out our Split Master : Bone Expander and Ridge Splitting Combo Kit!
    Learn More
  2. Regular Price: $999.00

    Special Price $679.99

    The Split Master Kit combines MCT's Ridge Splitting (Bone Crester) and Bone Expander kits into one simple system. Kit includes: MCT Ridge Splitting Components, MCT Bone Expander Components, Plus FREE Set Of 4 Ridge Splitting Chisels. Watch video below to see full kit components and use. Learn More
  3. Regular Price: $330.00

    Special Price $220.00

    As low as: $199.00

    The i-Brush is a debridement instrument for dental implants subjected to peri-implantitis. It is easy to use and cleans infected implant surface without causing any surface damage.

    • Sold in Packs of 10. Single patient use only.
    • Easy to use. (No incision. Fast Surgery).
    • Made of stainless steel bristles with a stainless steel shaft.
    • Indicated for the open debridement of titanium implant surfaces in bone defects caused by periimplantitis.
    • Surface is preserved even after use of i-brush.
    • Packaged sterile and must be used immediately after opening.
    • Latch-type to fit any latch-type handpiece
    Learn More
  4. Regular Price: $450.00

    Special Price $409.99

    Stabilize Barrier Membranes with our affordable titanium bone tack kit.

    • Kit includes: 1 Bone Tack Holder + Choice of 21 Tacks or 80 Tacks
    • Choose from 21 Tacks (4.5mm L) or 80 Tacks (40 of 4.5mm L & 40 of 3.5mm L).
      All Tacks have 2.5mm D.
    • High Quality Titanium membrane tacks.
    • Easy delivery to surgical site.
    • Convenient Tack storage box.
    • Choose Number of Tacks below (21 Mini Kit or 80 Master Kit).
    Learn More
  5. Regular Price: $1,749.99

    Special Price $1,659.00

    Perform the ultimate atraumatic extraction using the Easy X Trac System. The Easy X Trac technique has been developed for extracting single and double rooted teeth and provides significant benefits over traditional extraction instruments.

    • No rotary movements.
    • Minimizes bone loss
    • Reduce damage to soft tissue. No post-traumatic swelling.
    • Preserves the alveolous prior to immediate or delayed implant placement

    Kit includes: XT100 Easy X-TRACTOR, XT110 (set of 3 drills), XT120 X-TRAC ratchet, XT128 (set of 3 28mm screws with 1.75mm diameter), XT133 (set of 3 33mm screws with 1.75mm diameter), XT140L (left side protector plate, XT140R (right side protector plate), XT150 (burr block for drills and screws), a sterilization cassette, and a Tutorial CD-ROM.

    Learn More
  6. Regular Price: $699.00

    Special Price $499.00

    A key addition to any sinus lift kit, the Hydro (Water) Lift system helps reduce the risk of Schneiderian membrane perforation during the sinus membrane lifting operation. The system uses the proven technique of hydrostatic sinus lift, to provide evenly distributed hydraulic pressure during sinus membrane elevation, thus ensuring the safety of the procedure. Can be used in conjunction with all popular sinus lift kits.. See research, video and specific kit components below. Learn More
  7. Starting at: $220.00

    With the ACM, Auto Chip, Bone Collector Harvesting Kit, from Neobiotech, you can collect 1cc of autogenous bone within 10 seconds. Autogenous (or Autologous) bone is the gold standard for bone grafting.

    • Kit includes: 1 (one) drill and 1 (one) housing stopper + 6 additional stoppers.
    • Recommended speed 50~300RPM drilling.
    • Stopper will provide 3cc of bone.
    • Additional Housing Stoppers are already sterilized, Do Not Sterilize housing again before using. (Could be melted)
    Learn More
  8. Regular Price: $750.00

    Special Price $599.00

    The implant removal kit contains the tools you need to remove a failed dental implant while minimizing trauma to the bone.

    Kit includes:

    • 3 Specialized Implant Remover Screws for all popular implant systems.
    • 1 Remover Wrench for reverse torque.
    • 1 Hand Adaptor.
    • 7 Trephines (for difficult combination cases, if needed)
    Learn More
  9. Regular Price: $155.00

    Special Price $139.50

    The EZ Stent Multiple Teeth Set is a set of thermoplastic surgical templates that provide the easiest and most economical way to make accurate surgical guides for osseous sites in a tooth-bound (anterior) and posterior regions, in minutes using hot water alone. It is perfect for multiple implant placement. Watch Video, See a Case, Read FAQ.

    • Compatible with Most Implant Systems: The titanium drill sleeve of EZ Stent (inner Ø 2.3mm) is compatible with the pilot drill of most dental implant systems.
    • Cutting Grooves: The thermoplastic base is marked with cutting grooves in 5mm intervals, and can be cut and join to create an extended guide using scissor and hot water alone.
    • Reduced Sleeve Height The titanium drill sleeve has a reduced height of 6mm to accommodate patients with limited intraoral access.
    • Use as a Radiographic Marker on CBCT: The titanium drill sleeve can be used as a radiographic marker on CBCT.
    • Accurate & Precise Depth Control: Precise drill depth control with new silicone stoppers
    Kit Contains: 5 Thermoplastic titanium/ polymer templates for multiple implant placement (3 Tooth-Bound and 2 Free-End templates with cutting grooves /Sleeve height 6mm, sleeve inner Ø2.3mm) , 5 Guide pins ( stainless steel/Length 20mm, Ø2.3mm), 5 Drill stoppers ( silicone/ Length 16mm), 1 Drill for dental laboratory ( steel / Ø2.3mm) , 1 Flexible plastic ruler (Length 160mm scaled in 5mm increments) Learn More
  10. Regular Price: $1,995.00

    Special Price $1,750.00

    Effectively and easily remove failed implants with our next generation implant removal kit incorporating patent-pending wave technology to enhance the popular Neobiotech, Biomet 3i, and Zimmer 3i Implant Removal Kits. 1 No need to trephine! Features new implant removal instruments that reduce rotational slippage to allow for greater control during the implant removal procedure.

    Kit includes:

    • 6 Specialized Implant Remover Screws (+2 of each type) for all popular implant systems.
    • 4 Gen2 Implant Remover Tips for different implant sizes, 2 Adaptors and 2 Bodies.
    • 1 Special Torque ratchet with two directions for proceeding fixture removal.
    • 3 Hex Screw Drivers
    This kit is comparable to Neobiotech, Biomet 3i or Zimmer 3i Implant Removal Kits. It offers improvements with new specialized wave-like parts.
    Learn More

Page:
  1. 1
  2. 2
  3. 3
  4. 4

Back to top