Neobiotech SCA Kit

Neobiotech SCA Kit

Regular Price: $2,500.00

Special Price $1,995.00

The top-selling Neobiotech SCA Kit provides a complete set of tools for performing a crestal sinus lift, effectively and safely. It features a unique s-reamer drill design, and depth control.

  • S-reamer’s head has been designed with a special blade structure to leave a thin bone disk between membrane and reamer (e.g., the reamer does not touch the membrane directly)
  • S-reamer can be used even in misaligned and septum cases
  • Stoppers control the drilling depth of the S-reamer. 10 pieces, 2mm-11mm
  • Stoppers can also be mounted on the bone spreader and bone condenser
  • Includes: 10 Stoppers, 4 S- Reamers, 2 Bone Spreaders, Initial Drill, Bone Inserter, Depth Gauge, Bone Carrier and Condenser.
This kit is exactly the same as the Zimmer SCA (Sinus Crestal Approach) Kit.


The Sinus Crestal Approach Kit offers a minimally invasive option for sinus lift procedures. The unique drill design of the Sinus Crestal Approach Kit’s S-reamer head (800-1200rpm) leaves a thin bone disk between the Schneiderian membrane and the reamer for optimum protection, and it can be used in misaligned and septum cases. Furthermore, an assortment of stoppers control the drilling depth of the S-reamer from 2mm to 11mm, and the stoppers can be mounted on the bone spreader and inserter, thus making the kit a complete solution for performing a crestal sinus lift.

See full components, case, and how-to-videos below.

Neobiotech SCA Sinus Crestal Approach Kit Clinical Video

Neobiotech SCA Kit Components

Neobiotech SCA Sinus Crestal Approach Kit Clinical Case

1. The residual bone height of #26 and 27 were estimated as 8.2mm and 6.4mm respectively. It was required the membrane to lift up about 4~6mm

2. Drill 1mm shorter than residual bone height until 3.8mm drill in diameter.

3. Mount 1mm longer stopper than the drilling length in step 2 on the 3.6mm S-reamer.

4. If the inferior cortical wall does not perforate until stopper reaches to crestal bone, drill again using the 1mm longer stopper mounted in S-reamer

5. Use the drilling speed at 800 ~ 1,200 rpm with copious irrigation. Stopper provides you the safe operation. It is possible to feel perforation while drilling. Drill comfortably with perpendicularity pressure

6. Each of them were perforated at 9mm and 7mm. To confirm membrane of cortical wall, residual bone must be checked by depth gauge carefully and exactly. Do not feel membrane with Depth gauge.

7. As the sinus membrane is lifted up about 4 to 6mm to an apical direction, the fixture specification is 5.0 in diameter x 11.5mm in length.

8. Insert the bone material till height you want continually.

9. After inserting the suitable bone, insert the bone in the sinus with the bone condenser which combined with stopper

10. Pack the bone in sinus with stopper mounted on bone condenser. The stopper size should be same as the residual bone height.

11. Recommend to use the bone spread with stopper in order to spread the inserted bone laterally ate every 0.2 ~ 0.3cc bone packing.

12. More than 3mm membrane elevation is required at first bone spread using. At every 0.2cc ~ 0.3cc bone insertion, required to spread the bone in sinus.

13. If the crest cortical bone density is the D2 level, the countersink is needed. Even though the hole was drilled smaller than expectation, it is possible to countersink as this drill is pointed.

14. Implant insertion : Use the suitable S-reamer and place Neo CMI implant fixture to obtain the initial fixation and self-compaction on D4

15. Place a 5.0 x 11.5mm Neo CMI implant to obtain the initial fixation and self-compaction on D4 bone.

16. Point of view on mouth and radiation(X-ray) after rebuilding prosthetic dentistry.

17. The image of completed prosthetic dentistry

17. The image of completed prosthetic dentistry

How to Use the SCA Kit

1. Initial Drill
Make a position and drill to the front of the inferior cortical wall("D") - Stopper : Depth("D") less 1~2mm - Speed : 1,200RPM

2. Surgical Drill (not included Kit)
Widening hole for easy bone insertion later

3. S Reamer
Drill inferior cortical wall and lift sinus membrane about 1mm - Stopper : Same length as depth if you don't feel the perforation of the inferior cortical wall, change stopper to depth + 1mm

4. Depth Gauge
Check the inferior wall's perforation by hanging the end of the depth gauge in the sinus wall - Stopper : Depth + 1mm

5. Bone Carrier + Condenser
Fill carrier and insert bone graft (0.05cc) Push bone graft into sinus(Condenser) - Stopper : Same length as depth

6. Bone spreader
Spread the bone laterally in sinus area wall("D") Use the bone spreader after inserting bone twice(more than 0.1cc) - Stopper : Depth + 1mm - Spedd : 80rpm

7. Final drill
Final drilling and counter sink or tap drill (dpending on bone density)

8. Implantation
Place an implant

Additional Information

Research No
Size No
Unit No
Manufacturer NeoBiotech

Customer Reviews

Excellent performance Review by Dr. Phil S
I am very satisfied with the cutting performance of this kit, and believe that, for me, using this kit has made the crestal approach easier and safer. (Posted on 6/29/2017)