Kerator IOS Overdenture Abutment Attachment Kit for Glidewell Hahn Implants
By: Kerator IOS
Last Updated: 12/31/2024
Choose your Implant Platform
Choose your Tissue Height
Each Kerator IOS pack comes with:
- Abutment, and a
- Male Processing Set which includes: 3 retention caps - Pink: 2.4 lbs, Blue: 1.2 lbs; Red: extra light angled, 0.8lbs, Metal housing, and a White spacer
The angulation of the Angled Kerator IOS attachments is 15 degrees. The tissue heights for the angled attachments are either 1.5mm or 3.0mm. Angled overdenture abutment comes with a screw that requires 1.25mm hex driver. The torque value is 25 Ncm.
The Hahn Implant system is compatible with the NobelActive Kerator product line. Hahn's instrumentation guide, specifically mentions the Nobel Active drivers, as you can see here: https://cdn.shopify.com/s/files/1/1616/9759/files/dental-implants-hahn-tapered-implant-instrumentation-guide.pdf The only thing to be aware of is that the Hahn Implant system groups the 4.3 platform with the 3.5 platform, while NobelActive groups the 4.3 with the 5.0. So effectively, for the Hahn platform you would choose the correct Kerator as follows: Hahn 3.0: Use KER-NA30 Hahn 3.5/4.3: Use KER-NA35 Hahn 5.0: Use KER-NA43 Of course, after you choose the platform, you need to then select your tissue height to get the correct Kerator for your specific case.
You May Also Like:
Classic 50/50 Mix
Promotes osteoconduction
Provides structural integrity
100% allograft
Eliminates mixing hassle
Moldable after hydration
Becomes flexible when hydrated
Augment thin bone over implants
Can be fixated with screws
No need to trim or fixate
Place up or down
Inherent antibacterial properties