Sterilization

Yes, the entire kit (including the surgical plastic cover) is autoclaveable.  Please remember, though, that the Fixation Screws are single-use only.

Completely dry all tools using a dry cloth or warm air before autoclaving. Dried tools should be stored in the KIT case.

After placing all the tools back into the kit, dry the entire kit in an Autoclave (15 Minutes At 273 ̊F / 134 ̊C - 15psi) and then store the kit at room temperature.

It is recommended to use a surgical autoclaving wrap around the kit when sterilizing the kit, so that no part of the kit touches the metal of the autoclave unit.

Cleaning Instruments

Following use, individual instruments should be cleaned throughly. Instruments should be washed with a non-corrosive, low sudsing neutral detergent. Cleaning of individual instruments can be accomplished by ultrasonic or automated cleaning (Warning: Do NOT place the entire kit in an ultrasonic, as doing so could damage the case. ONLY individual instruments can be cleaned with ultrasonic). Manufacturer does not suggest the use of any abrasive brushes or materials to clean. 

 

 

I am an Oral Surgeon and don't usually review products. If you are anything like me, most of you have tried different products that have worked and some that don't which end up sitting in the office. The Auto Bone Tack kit came with 21 tacks and I am down to 11 after 1 week of use. Haven't used it in the mandible yet, but in the maxilla it makes securing the membrane a breeze. I have used periosteal tacking sutures and screws, which are great, but a lot more difficult to place than these. About to order more tacks. Hope this helps you with your decision.

Dr. Michael S.

I have three other bone screw kits from major surgical supply houses. They cannot compare. The bone screw in this kit holds the screws tenaciously and makes everything so much easier. Watch the short video before you use it and the rest is easy.

Dr. Rand